- Email: contact@rage-mechanics.com
- contact@rage-mechanics.com
OUR PRODUCTS
New products
- Made to order
- New
PMT Stradale 90/60-6.5 Tire
The PMT Stradale is the road tire chosen by tuners for high-performance scooters: flexible carcass, soft compound that heats up quickly, and a round profile that holds the line in corners. On both dry and wet roads, it transforms the handling of a...
€49.90
Tax included
- Made to order
- New
PMT Stradale Tire 100/55-6.5
The PMT Stradale is the road tire chosen by tuners for high-performance scooters: flexible carcass, soft compound that heats up quickly, and a round profile that holds the lean angle. On both dry and wet roads, it transforms the handling of a...
€54.90
Tax included
- New
- Out of stock
Odyssr Drift Dual — Titanium Edition
The Drift Dual, without the steering playThe Titanium Edition is the Odyssr Drift Dual electric scooter as we wish it came from the factory: the original steering column is removed before the first ride and replaced with our grade 9 titanium...
€1,689.00
Tax included
Best Sellers
AMASS 8mm BULLET pair
The AMASS 8 mm bullets are the standard for high-power motor phase cables: gold-plated brass contact, 0.15 mΩ resistance, 80 A continuous and 170 A peak. This is the connector we install on all our MHS, MHT, XHS, and XHT range motors, and on our...
€2.00
Tax included
Black Dark Medium Braided Sleeving
The Black Dark braided sleeving in Medium size gives your cables a clean and colorful finish, while protecting them from friction and UV rays. Made in Germany, it retains its color and shape over time. Sold by the meter: order the desired...
€8.00
Tax included
Ferrari Red Medium Sleeving
The Ferrari Red braided sleeving in Medium size gives your cables a clean and colorful finish while protecting them from friction and UV rays. Manufactured in Germany, it retains its color and shape over time. Sold by the meter: order the exact...
€8.00
Tax included
On sale
- On sale!
- -€600.00
- Out of stock
- -€600.00
3Shul CL1400
Features: Controller based on the open-source VESC®-Project firmware by Benjamin Vedder. (VESC is a registered TM, owned by Benjamin Vedder) Field Weakening and MTPA (Maximum Torque Per Amp) are supported. Ability to create LISP modules from...
€1,500.00
€2,100.00
Tax included
RM30 Motor for Surron Light Bee
Our RM30 motor for Sur-ron Light Bee has been designed for performance and speed, intended for riders seeking power without compromise.The RM30 motor developed by Rage Mechanics is designed to be perfectly compatible with our 3Shul controllers for...
€749.00
€899.00
Tax included
OUR PRODUCTS There are 127 products.
Subcategories
- Out of stock
Brake Caliper Adapters
Upgrading to 4-piston calipers and 160 or 180 mm discs often requires relocating the caliper mount. These offset adapters, machined by Rage Mechanics, utilize the original swingarm mount and position the caliper at the correct offset for your...
€145.80
Tax included
- Out of stock
E-Watts Reinforced Disc 160mm/3mm
The E-Watts 160 mm disc uses the winning formula: 3 mm thickness, ultra-powerful braking, signature sound, tested at over 147 km/h on the track. This is the disc we now install instead of BrakeStuff, at a much more accessible...
€45.00
Tax included
- Out of stock
Reinforced Clamp Ring
The clamp ring is the weak point on many steering stems: when it deforms, the stem develops play and comes loose. This reinforced, billet-machined ring replaces the stock part and maintains consistent clamping. It is the same ring included with...
€55.00
Tax included
- Out of stock
Performance (S) 72V 30Ah Battery for Dualtron Victor
This Performance 72V 30Ah battery is designed for a modified Dualtron Victor: controller replaced, wiring redone, and a pack that utilizes the entire deck volume. It is not suitable for a stock Victor, where the controller and cables remain...
€1,625.00
Tax included
- Out of stock
PMT Junior 90/65-6.5
The PMT Junior is a grooved tire derived from minimotos: unlike slicks, it clears water and remains predictable on wet roads, while maintaining a stiff carcass and grip far superior to stock tires. This is the tire we fit as standard on the...
€60.40
Tax included
- Out of stock
Motor Cooling Fan
A motor that runs hard heats up; a motor that heats up loses torque and wears out its magnets. This 6-blade cooling fan, 3D-printed in PETG, attaches to the cable-side flange and forces air through the motor to lower the temperature during...
€25.00
Tax included
- Out of stock
Custom Dual C350 Plate for Slack
This custom-machined plate holds two C350-format controllers and mounts inside the Slack Core 920R: rigid retention, thermal contact for heat dissipation, and cable routing. This is the central component of our Slack builds featuring an 80V...
€60.00
Tax included
- Out of stock
Slack 3D Prints
Set of 3D printed parts (PETG) designed for the integration of VESC controllers, SmartDisplay, and Performance batteries in a Slack Core 920R: covers, mounts, cable routing. Companion to our C350 dual plate.SpecificationsMaterial:...
€100.00
Tax included
Nami Titanium Steering Column 50cm
The 50 cm titanium column for Nami Burn-E is our standard length: it retains a handlebar height close to stock with the rigidity of grade 9 titanium. Plug & play installation, the steering no longer develops play.Why a titanium column?The...
€229.00
Tax included
- Out of stock
Rage Mechanics Custom Chassis
A custom chassis is the starting point for a unique machine: aluminum or carbon deck, titanium steering column, CNC swingarm, geometry adapted to the rider and use case (track, road, speed record). We apply everything we've learned from our RM-X...
€1,920.00
Tax included
- Out of stock
Nami Plug and Play Wiring
Switching a Nami Burn-E to VESC controllers with a SmartDisplay normally requires hours of wiring. This plug & play harness uses the original Nami connectors (battery, motors, controls) along with those for our controllers and the display: you...
€420.00
Tax included
- Out of stock
C350 SmartDisplay Harness + Hall Sensors
This harness connects a C350-format controller (VESC) to the SmartDisplay via the CAN bus and connects the motor's Hall sensors and temperature sensor. Lengths and connectors adapted to our setups: no more approximate soldering, clean and...
€100.00
Tax included