- Out of stock
- Email: contact@rage-mechanics.com
- contact@rage-mechanics.com
C350 SmartDisplay Harness + Hall Sensors
€100.00
Tax included
C350 Harness → SmartDisplay + Hall sensors: the ready-to-plug wiring between a C350-format controller and the SmartDisplay, with the motor Hall sensor connections.
Security guarantees
All our products are tested before being placed on the market.
Safety Guarantees
All of our products are tested before they hit the market.
Delivery
Fast shipping for in-stock products
Shipping
Fast shipping on in-stock products
Secure Payment
Up to 4 times free of charge
Secure Payment
Up to 4 interest-free installments
This harness connects a C350-format controller (VESC) to the SmartDisplay via the CAN bus and connects the motor's Hall sensors and temperature sensor. Lengths and connectors adapted to our setups: no more approximate soldering, clean and removable wiring.
Contents
- Controller → SmartDisplay connection (CAN)
- Hall sensor / motor temperature connections
For a dual-motor setup, plan for one harness per controller.
CAB-C350-SMART-HALL
No customer reviews for the moment.
16 other products in the same category:
- Out of stock
Slack 3D Prints
Set of 3D printed parts (PETG) designed for the integration of VESC controllers, SmartDisplay, and Performance batteries in a Slack Core 920R: covers, mounts, cable routing. Companion to our C350 dual plate.SpecificationsMaterial:...
€100.00
Tax included
- Made to order
SHT60 HIGH TORQUE Motor
The SHT60 HIGH TORQUE Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters (Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf). Featuring 60 mm magnets and 4 mm² phase cables, this is the...
€349.00
Tax included
- Made to order
MHS70 HIGH SPEED Motor
The MHS70 HIGH SPEED Motor is a high-speed hub motor supplied with its tubed split rims, designed to replace the original motors of large dual-motor electric scooters: Dualtron Thunder and Ultra, Bronco Xtreme, Nami Burn-E. 70 mm magnets, 10 mm²...
€489.00
Tax included
- Out of stock
PMT Junior 90/65-6.5
The PMT Junior is a grooved tire derived from minimotos: unlike slicks, it clears water and remains predictable on wet roads, while maintaining a stiff carcass and grip far superior to stock tires. This is the tire we fit as standard on the...
€60.40
Tax included
- Out of stock
Brake Plate
The brake plate serves as an interface between the swingarm (or motor) and the caliper: it creates or relocates mounting points to accommodate the chosen caliper and rotor. We use it on our XHS/XHT motor setups and on custom builds with Hope...
€20.00
Tax included
Blue Carbon Medium Sleeving
The Blue Carbon braided sleeving in Medium size gives your cables a clean and colorful finish while protecting them from friction and UV rays. Manufactured in Germany, it maintains its color and shape over time. Sold by the meter: order the...
€8.00
Tax included
- Made to order
FHS60 Motor
The FHS60 Motor is a high-speed 10-inch hub motor supplied with split rims, designed for compact and intermediate scooters: Kaabo Mantis, Dualtron 2 / 3 / New / Eagle / Victor, Ninebot Max G30 equipped with Monorim suspensions. 60 mm magnets, 4...
€299.00
Tax included
Short Stem for 31.8mm handlebars
A short stem keeps the handlebar as close as possible to the steerer tube: more direct steering, less leverage on the column, and a compact look. 31.8 mm clamping diameter, 28.6 mm standard steerer: it mounts on our stem adapters and all our...
€34.99
Tax included
- Out of stock
Hope Stainless Steel Braided Brake Hose by the Meter
The stainless steel braided brake hose does not expand under pressure, unlike a plastic hose: the lever remains firm, braking precise. Sold by the meter, it allows you to remake hoses to the exact length of your scooter after installing a titanium...
€14.99
Tax included
CNC Swingarm Pair - Compatible with Dualtron
Rage Mechanics Thunder Swingarm Pair – High-performance CNC aluminum for Dualtron Optimize the rigidity and braking of your Dualtron electric scooter with the Rage Mechanics Thunder swingarm pair. Designed with our expertise in...
€199.98
Tax included
- Out of stock
Nami arm spacer kit for XHS75/XHT75 and XHS80/XHT80
The XHS/XHT 75 and 80 motors are wider than the original Nami Burn-E motors. This stainless steel axle + spacer kit, machined in France, widened the Nami arms by the exact amount needed for the motor to be centered and the wheel aligned.Kit...
€329.99
Tax included
Shining Orange Medium Sleeving
The Shining Orange braided sleeving in Medium size gives your cables a clean, colorful finish while protecting them from friction and UV rays. Manufactured in Germany, it retains its color and durability over time. Sold by the meter: order the...
€8.00
Tax included
- Made to order
Weped OEM-style Rim Rage Mechanics
This rim features the original Weped format (Shinko Weped tires, PMT 130/40R6.5 Stradale Radial) in CNC-machined aluminum, tubeless, and split-rim design: you keep the Weped look and fitment, with a tire change that takes minutes instead of an...
€199.99
Tax included
- Made to order
W60 Motor
The W60 Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters: Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf. 60 mm magnets, 6 mm² phase cables, 2000 W nominal — the right compromise for anyone...
€419.00
Tax included
- Out of stock
Performance Battery 80V 40.5Ah Slack Core 920R...
The most energetic pack in our catalog for the Slack Core 920R: 80 V (22S), 40.5 Ah, 3240 Wh using Molicel P45B cells, the benchmark for high discharge. It is intended for Slack builds with controllers accepting 84 V; it does not fit a stock...
€2,950.00
Tax included
C350 Harness → SmartDisplay + Hall sensors: the ready-to-plug wiring between a C350-format controller and the SmartDisplay, with the motor Hall sensor connections.
error Your review appreciation cannot be sent