The clamp ring is the weak point on many steering stems: when it deforms, the stem develops play and comes loose. This reinforced, billet-machined ring replaces the stock part and maintains consistent clamping. It is the same ring included with our titanium stem kits, sold separately here.
Specifications
Manufacturing: machined from solid billet (7075 aluminum)
Compatibility: Rage Mechanics stems; other stems upon request (please specify model)
ACC-BAGUE-SERRAGE
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The XHS/XHT 75 and 80 motors are wider than the original Nami Burn-E motors. This stainless steel axle + spacer kit, machined in France, widened the Nami arms by the exact amount needed for the motor to be centered and the wheel aligned.Kit...
The Shining Yellow braided sleeve in Small size gives your cables a clean, colorful finish and protects them from chafing and UV rays. Made in Germany, it retains its color and durability over time. Sold by the meter: order the quantity you want,...
With 4000 W, this UltraCharger recharges a 2 to 3 kWh battery in about an hour, where an original charger takes all night. It is intended for Rage Mechanics Performance batteries compatible with superchargers (sized BMS and connectors) and custom...
The most energetic pack in our catalog for the Slack Core 920R: 80 V (22S), 40.5 Ah, 3240 Wh using Molicel P45B cells, the benchmark for high discharge. It is intended for Slack builds with controllers accepting 84 V; it does not fit a stock...
List of SmartDisplay features:
It can lock the vehicle via Bluetooth (with a tag, smartphone, or any Bluetooth device). When locked, the throttle trigger does not work, so no one can ride off with your vehicle! You can also manually lock the...
The brake plate serves as an interface between the swingarm (or motor) and the caliper: it creates or relocates mounting points to accommodate the chosen caliper and rotor. We use it on our XHS/XHT motor setups and on custom builds with Hope...
The New Storm and Storm LTD are heavyweights: 84 V, over 45 kg, and power that puts the original column to a severe test. Play at the folding mechanism, loosening, flexing: on these models, a rigid column is not a luxury, it's a matter of...
The FH60 Motor is a versatile 10-inch hub motor supplied with split rims, designed for compact and mid-size electric scooters: Kaabo Mantis, Dualtron 2 / 3 / New / Eagle / Victor, Ninebot Max G30 equipped with Monorim suspensions. 60 mm magnets, 4...
The Red Blood braided sleeving in Medium size gives your cables a clean, colorful finish and protects them from abrasion and UV rays. Made in Germany, it retains its color and shape over time. Sold by the meter: order the desired quantity, we cut...
The W60 Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters: Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf. 60 mm magnets, 6 mm² phase cables, 2000 W nominal — the right compromise for anyone...
The Black Dark braided sleeving in Medium size gives your cables a clean and colorful finish, while protecting them from friction and UV rays. Made in Germany, it retains its color and shape over time. Sold by the meter: order the desired...
High-end replacement pack for the Weped Coupe: 18S8P in Samsung 50S, delivering 67V nominal and 40Ah, featuring a Bluetooth Smart BMS to monitor charge, consumption, and temperature directly from your phone.SpecificationsConfiguration: 18S8PCells:...
The PMT T41 is a racing slick: soft compound, fast warm-up, exceptional grip on dry surfaces. In 90/65-6.5, it is the most common size for scooters: it directly replaces a stock 11" tire on a 6.5" rim and is suitable for both front and rear...
A motor that runs hard heats up; a motor that heats up loses torque and wears out its magnets. This 6-blade cooling fan, 3D-printed in PETG, attaches to the cable-side flange and forces air through the motor to lower the temperature during...
error Your review appreciation cannot be sent