ELECTRIC SCOOTER

RM-Series CS75

Rage Mechanics Series - CS75 Precision, power, challenge: The CS75 is not a scooter like the others. In a world dominated by compromise, it stands out as an exceptional machine. Designed for those who accept no...

Extended Deck Kit + Carbon Footplate for Dualtron...

Etwow GT Performance 52V 9Ah Battery (Molicel P45B)

This pack turns an E-Twow GT into a pocket rocket: Molicel P45B (high-discharge) cells in 52 V 9 Ah, in the GT deck format. The trade-off: the original controller cannot handle it, this battery must be installed only with a replaced controller...

Hope Tech4 V4 Pair Black/Purple braided hose

At Rage Mechanics, we have chosen the Hope Tech 4 V4 to equip our performance machines: these are the most powerful and reliable brakes we have tested on electric scooters. This pair is offered in a black / purple finish, fitted with a 5 mm...

Rage Mechanics CNC Aluminum Rim

We designed this CNC-machined aluminum rim for two reasons: to give Weped scooters the comfort and handling of classic tires instead of the stock ones, and to equip our high-performance XHS75, XHT75, XHS80, XHT80, XHS90 motors. It is tubeless,...

XHS75 HIGH SPEED Motor

The XHS75 HIGH SPEED Motor is a high-speed hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 75 mm magnets, 10 mm² phase cables, 6000 W nominal: this is the range we install on our own...

PMT Junior 90/65-6.5

The PMT Junior is a grooved tire derived from minimotos: unlike slicks, it clears water and remains predictable on wet roads, while maintaining a stiff carcass and grip far superior to stock tires. This is the tire we fit as standard on the...

Performance Battery 80V 40.5Ah Slack Core 920R...

The most energetic pack in our catalog for the Slack Core 920R: 80 V (22S), 40.5 Ah, 3240 Wh using Molicel P45B cells, the benchmark for high discharge. It is intended for Slack builds with controllers accepting 84 V; it does not fit a stock...

PMT E-Fire 10x3.0

The PMT E-Fire 10 × 3.0 brings PMT quality to 10-inch scooters: rigid carcass, grippy rubber, even wear—where stock tires deform and slip as soon as power goes up. It equips our FH60 / FHS60 / FHT60 motors and Kaabo Mantis, Dualtron Victor, and...

Nami arm spacer kit for XHS75/XHT75 and XHS80/XHT80

The XHS/XHT 75 and 80 motors are wider than the original Nami Burn-E motors. This stainless steel axle + spacer kit, machined in France, widened the Nami arms by the exact amount needed for the motor to be centered and the wheel aligned.Kit...

Hope Tech4 V4 Pair Black/Orange braided line

At Rage Mechanics, we chose the Hope Tech 4 V4 to equip our performance machines: they are the most powerful and reliable brakes we have tested on electric scooters. This pair is offered in a black / orange finish, equipped with a 5 mm braided...

XHT75 HIGH TORQUE Motor

The XHT75 HIGH TORQUE Motor is a high-torque hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 75 mm magnets, 10 mm² phase cables, 6000 W nominal: this is the range we install on our own...