- Email: contact@rage-mechanics.com
- contact@rage-mechanics.com
OUR PRODUCTS
New products
- Made to order
- New
PMT Stradale 90/60-6.5 Tire
The PMT Stradale is the road tire chosen by tuners for high-performance scooters: flexible carcass, soft compound that heats up quickly, and a round profile that holds the line in corners. On both dry and wet roads, it transforms the handling of a...
€49.90
Tax included
- Made to order
- New
PMT Stradale Tire 100/55-6.5
The PMT Stradale is the road tire chosen by tuners for high-performance scooters: flexible carcass, soft compound that heats up quickly, and a round profile that holds the lean angle. On both dry and wet roads, it transforms the handling of a...
€54.90
Tax included
- New
- Out of stock
Odyssr Drift Dual — Titanium Edition
The Drift Dual, without the steering playThe Titanium Edition is the Odyssr Drift Dual electric scooter as we wish it came from the factory: the original steering column is removed before the first ride and replaced with our grade 9 titanium...
€1,689.00
Tax included
Best Sellers
AMASS 8mm BULLET pair
The AMASS 8 mm bullets are the standard for high-power motor phase cables: gold-plated brass contact, 0.15 mΩ resistance, 80 A continuous and 170 A peak. This is the connector we install on all our MHS, MHT, XHS, and XHT range motors, and on our...
€2.00
Tax included
Black Dark Medium Braided Sleeving
The Black Dark braided sleeving in Medium size gives your cables a clean and colorful finish, while protecting them from friction and UV rays. Made in Germany, it retains its color and shape over time. Sold by the meter: order the desired...
€8.00
Tax included
Ferrari Red Medium Sleeving
The Ferrari Red braided sleeving in Medium size gives your cables a clean and colorful finish while protecting them from friction and UV rays. Manufactured in Germany, it retains its color and shape over time. Sold by the meter: order the exact...
€8.00
Tax included
On sale
- On sale!
- -€600.00
- Out of stock
- -€600.00
3Shul CL1400
Features: Controller based on the open-source VESC®-Project firmware by Benjamin Vedder. (VESC is a registered TM, owned by Benjamin Vedder) Field Weakening and MTPA (Maximum Torque Per Amp) are supported. Ability to create LISP modules from...
€1,500.00
€2,100.00
Tax included
RM30 Motor for Surron Light Bee
Our RM30 motor for Sur-ron Light Bee has been designed for performance and speed, intended for riders seeking power without compromise.The RM30 motor developed by Rage Mechanics is designed to be perfectly compatible with our 3Shul controllers for...
€749.00
€899.00
Tax included
OUR PRODUCTS There are 80 products.
Subcategories
Active filters
- Availability: Not available
- Out of stock
BrakeStuff 160mm (3mm) high-performance reinforced disc
The BrakeStuff 160 mm in 3 mm: same construction as the 180, in a diameter that fits most scooters without an adapter. Ultra-powerful braking, characteristic sound, tested at over 147 km/h on track.SpecificationsDiameter: 160 mmThickness: 3...
€149.99
Tax included
- Out of stock
Brake Plate
The brake plate serves as an interface between the swingarm (or motor) and the caliper: it creates or relocates mounting points to accommodate the chosen caliper and rotor. We use it on our XHS/XHT motor setups and on custom builds with Hope...
€20.00
Tax included
- Out of stock
Performance Battery 80V 40.5Ah Slack Core 920R...
The most energetic pack in our catalog for the Slack Core 920R: 80 V (22S), 40.5 Ah, 3240 Wh using Molicel P45B cells, the benchmark for high discharge. It is intended for Slack builds with controllers accepting 84 V; it does not fit a stock...
€2,950.00
Tax included
- Out of stock
UltraCharger "GTK" type 4000W
With 4000 W, this UltraCharger recharges a 2 to 3 kWh battery in about an hour, where an original charger takes all night. It is intended for Rage Mechanics Performance batteries compatible with superchargers (sized BMS and connectors) and custom...
€350.00
Tax included
- Out of stock
Etwow GT Performance 52V 9Ah Battery (Molicel P45B)
This pack turns an E-Twow GT into a pocket rocket: Molicel P45B (high-discharge) cells in 52 V 9 Ah, in the GT deck format. The trade-off: the original controller cannot handle it, this battery must be installed only with a replaced controller...
€351.00
Tax included
- Out of stock
Stem Adapter
The stem adapter transforms your scooter's steering column into a standard MTB steerer (28.6 mm): you can then choose your stem (length, angle) and handlebar (width, material) from the entire cycling market. Machined from solid aluminum, it is...
€54.00
Tax included
- Out of stock
Brake Caliper Adapters
Upgrading to 4-piston calipers and 160 or 180 mm discs often requires relocating the caliper mount. These offset adapters, machined by Rage Mechanics, utilize the original swingarm mount and position the caliper at the correct offset for your...
€145.80
Tax included
- Out of stock
E-Watts Reinforced Disc 160mm/3mm
The E-Watts 160 mm disc uses the winning formula: 3 mm thickness, ultra-powerful braking, signature sound, tested at over 147 km/h on the track. This is the disc we now install instead of BrakeStuff, at a much more accessible...
€45.00
Tax included
- Out of stock
Reinforced Clamp Ring
The clamp ring is the weak point on many steering stems: when it deforms, the stem develops play and comes loose. This reinforced, billet-machined ring replaces the stock part and maintains consistent clamping. It is the same ring included with...
€55.00
Tax included
- Out of stock
Performance (S) 72V 30Ah Battery for Dualtron Victor
This Performance 72V 30Ah battery is designed for a modified Dualtron Victor: controller replaced, wiring redone, and a pack that utilizes the entire deck volume. It is not suitable for a stock Victor, where the controller and cables remain...
€1,625.00
Tax included
- Out of stock
PMT Junior 90/65-6.5
The PMT Junior is a grooved tire derived from minimotos: unlike slicks, it clears water and remains predictable on wet roads, while maintaining a stiff carcass and grip far superior to stock tires. This is the tire we fit as standard on the...
€60.40
Tax included
- Out of stock
Motor Cooling Fan
A motor that runs hard heats up; a motor that heats up loses torque and wears out its magnets. This 6-blade cooling fan, 3D-printed in PETG, attaches to the cable-side flange and forces air through the motor to lower the temperature during...
€25.00
Tax included