OUR PRODUCTS
OUR PRODUCTS There are 168 products.
Subcategories
Performance (S) Battery 80V 45AH TALARIA TL3000 &...
The pack that unleashes a Talaria TL3000 / TL4000 (MX3, MX4): 80 V, 45 Ah, 3600 Wh using high-discharge cells, in a waterproof casing with a pressure valve. With this battery, the controller can be set up to 22 kW without voltage...
Performance (S) 72V 15Ah External Battery
Same principle as our Range external battery, with high-discharge cells: in addition to the range (1080 Wh more), the Performance external battery relieves the internal battery during current spikes. Result: fewer voltage drops, better power...
BrakeStuff 160mm (3mm) high-performance reinforced disc
The BrakeStuff 160 mm in 3 mm: same construction as the 180, in a diameter that fits most scooters without an adapter. Ultra-powerful braking, characteristic sound, tested at over 147 km/h on track.SpecificationsDiameter: 160 mmThickness: 3...
Brake Plate
The brake plate serves as an interface between the swingarm (or motor) and the caliper: it creates or relocates mounting points to accommodate the chosen caliper and rotor. We use it on our XHS/XHT motor setups and on custom builds with Hope...
Performance Battery 80V 40.5Ah Slack Core 920R...
The most energetic pack in our catalog for the Slack Core 920R: 80 V (22S), 40.5 Ah, 3240 Wh using Molicel P45B cells, the benchmark for high discharge. It is intended for Slack builds with controllers accepting 84 V; it does not fit a stock...
UltraCharger "GTK" type 4000W
With 4000 W, this UltraCharger recharges a 2 to 3 kWh battery in about an hour, where an original charger takes all night. It is intended for Rage Mechanics Performance batteries compatible with superchargers (sized BMS and connectors) and custom...
Etwow GT Performance 52V 9Ah Battery (Molicel P45B)
This pack turns an E-Twow GT into a pocket rocket: Molicel P45B (high-discharge) cells in 52 V 9 Ah, in the GT deck format. The trade-off: the original controller cannot handle it, this battery must be installed only with a replaced controller...
Short Stem for 31.8mm handlebars
A short stem keeps the handlebar as close as possible to the steerer tube: more direct steering, less leverage on the column, and a compact look. 31.8 mm clamping diameter, 28.6 mm standard steerer: it mounts on our stem adapters and all our...
Stem Adapter
The stem adapter transforms your scooter's steering column into a standard MTB steerer (28.6 mm): you can then choose your stem (length, angle) and handlebar (width, material) from the entire cycling market. Machined from solid aluminum, it is...
Brake Caliper Adapters
Upgrading to 4-piston calipers and 160 or 180 mm discs often requires relocating the caliper mount. These offset adapters, machined by Rage Mechanics, utilize the original swingarm mount and position the caliper at the correct offset for your...
E-Watts Reinforced Disc 160mm/3mm
The E-Watts 160 mm disc uses the winning formula: 3 mm thickness, ultra-powerful braking, signature sound, tested at over 147 km/h on the track. This is the disc we now install instead of BrakeStuff, at a much more accessible...