With your consent, we use cookies to measure site traffic and the effectiveness of our advertisements on Facebook and Instagram. Without a choice on your part, nothing is stored. You can change your mind at any time.
Privacy Policy
6-blade motor cooling fan in PETG to improve the cooling of our MHS, MHT, XHS, and XHT motors. Mounts on the cable-side flange (10 mm hole, M4 screw to be drilled).
Security guarantees
All our products are tested before being placed on the market.
Safety Guarantees
All of our products are tested before they hit the market.
A motor that runs hard heats up; a motor that heats up loses torque and wears out its magnets. This 6-blade cooling fan, 3D-printed in PETG, attaches to the cable-side flange and forces air through the motor to lower the temperature during intensive use or competition. Compatible with all our MHS, MHT, XHS, XHT motor ranges.
Installation
Flange drilling: 10 mm diameter holes for airflow
Attachment via M4 screw to be drilled and tapped
Cable side of the motor
Installation direction: the base design is intended for a rear motor with right-side ventilation. If you need the other direction (front motor, or left-side ventilation), please specify it when ordering.
Good to know
A ventilated motor is no longer waterproof: reserved for dry/track use, or to be protected by a grille. We can perform the drilling and installation in our workshop upon request.
The XHS75 HIGH SPEED Motor is a high-speed hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 75 mm magnets, 10 mm² phase cables, 6000 W nominal: this is the range we install on our own...
The FHS60 Motor is a high-speed 10-inch hub motor supplied with split rims, designed for compact and intermediate scooters: Kaabo Mantis, Dualtron 2 / 3 / New / Eagle / Victor, Ninebot Max G30 equipped with Monorim suspensions. 60 mm magnets, 4...
The SHT60 HIGH TORQUE Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters (Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf). Featuring 60 mm magnets and 4 mm² phase cables, this is the...
The XHS80 HIGH SPEED Motor is a high-speed hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 80 mm magnets, 10 mm² phase cables, 6000 W nominal: this is the range we install on our own...
The Weped FS Motor is the original motor that powers the Weped FS, available as a spare part. With 60 mm magnets, Hall sensors, and a high-torque winding, it is perfect for restoring an FS or adding torque to a Weped SST, SSGT, GTS, or GTR.Which...
The MHT65 HIGH TORQUE Motor is a high-torque hub motor supplied with its tube-type split rims, designed to replace the original motors of large dual-motor scooters: Dualtron Thunder and Ultra, Bronco Xtreme, Nami Burn-E. 65 mm magnets, 10 mm²...
The SHS60 HIGH SPEED Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters (Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf). Featuring 60 mm magnets and 4 mm² phase cables, this is the...
The FH60 Motor is a versatile 10-inch hub motor supplied with split rims, designed for compact and mid-size electric scooters: Kaabo Mantis, Dualtron 2 / 3 / New / Eagle / Victor, Ninebot Max G30 equipped with Monorim suspensions. 60 mm magnets, 4...
The MHT75 HIGH TORQUE Motor is a high-torque hub motor delivered with its tube-type split rims, designed to replace the original motors of large dual-motor electric scooters: Dualtron Thunder and Ultra, Bronco Xtreme, Nami Burn-E. 75 mm magnets,...
The W50 Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters: Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf. 50 mm magnets, 6 mm² phase cables, 2000 W nominal — the right compromise for anyone...
The MHS75 HIGH SPEED Motor is a high-speed hub motor supplied with its tubed split rims, designed to replace the original motors of large dual-motor scooters: Dualtron Thunder and Ultra, Bronco Xtreme, Nami Burn-E. 75 mm magnets, 10 mm² phase...
The XHS100 HIGH SPEED Motor is a high-speed hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 100 mm magnets, 10 mm² phase cables, 6000 W nominal: this is the range we mount on our own...
The FHT60 Motor is a 10-inch high-torque hub motor supplied with split rims, designed for compact and mid-size scooters: Kaabo Mantis, Dualtron 2 / 3 / New / Eagle / Victor, Ninebot Max G30 equipped with Monorim suspensions. 60 mm magnets, 4 mm²...
The W60 Motor is a hub motor with an integrated tubeless rim for 11" to 13" scooters: Dualtron Thunder and Ultra, Bronco, Nami Burn-E, Weped FF, Rion, Kaabo Wolf. 60 mm magnets, 6 mm² phase cables, 2000 W nominal — the right compromise for anyone...
The XHS90 HIGH SPEED Motor is a high-speed hub motor designed by Rage Mechanics for high-power electric scooters, primarily the Weped SST, SSGT, and FS. 90 mm magnets, 10 mm² phase cables, 6,000 W nominal: this is the range we install on our own...
6-blade motor cooling fan in PETG to improve the cooling of our MHS, MHT, XHS, and XHT motors. Mounts on the cable-side flange (10 mm hole, M4 screw to be drilled).
