CNC-machined swingarms for electric scooters: enhanced rigidity, improved braking, and greater precision
The swingarms connect each wheel to the frame. They support the motor, house the brake caliper, and work with the suspension. On a powerful scooter, they absorb the motor's torque, the braking forces, and the impacts from the road. CNC-machined swingarms made from a solid block of aluminum provide rigidity, precise dimensions, and the ability to mount larger brakes, whereas original swingarms often reach their limitations.
The essentials
- The swingarm holds the wheel, the motor, and the brake caliper; it pivots on the frame and rests on the shock absorber.
- Machined from a solid block using CNC technology, it is more rigid and precise than a standard production part.
- Our front forks for Dualtron maintain the original length and feature a caliper mount on both sides.
- A rigid arm cannot compensate for bearings and joints that are in poor condition; everything needs to be in good working order together.
The role of a swingarm
On most suspended scooters, each wheel is mounted at the end of an arm that pivots around an axis fixed to the frame. When the wheel encounters a bump, the arm rotates around this axis, compressing the shock absorber. The motor-wheel is secured within the arm by its axle, and the brake caliper is attached to it to clamp the brake disc.
The arm is therefore subjected to three types of stress:
- the motor torque, which attempts to rotate the shaft within the arm with each acceleration;
- The braking system, transmitted through the caliper, which twists the arm in the opposite direction;
- `The impacts and forces experienced during cornering put it under stress, causing it to flex and twist.`
If the arm bends, even slightly, the wheel loses its alignment, the disc rubs or vibrates within the caliper, and the machine becomes less precise. On a slow scooter, these deformations may go unnoticed. However, on a machine that brakes hard at high speeds, they become noticeable.
Why machine solid blocks?
A CNC-machined arm is produced by a computer-controlled machine from a block of aluminum. This method offers three advantages:
- Precision: The bore diameters of the axles and the caliper mounting points are precisely within tolerance, from one unit to the next;
- Stiffness: The shape can be designed to add material where the forces are concentrated
- Design Freedom: You can add mounting points, for example for a brake caliper, without compromising the manufacturing process.
Anodization then protects the aluminum from corrosion and surface wear.
Our CNC-machined arms for Dualtron
Our CNC-machined Dualtron-compatible arm set is solid, CNC-machined, and anodized black. According to its specifications:
- It is compatible with Dualtron Thunder models 1, 2, and 3, as well as the Achilleus and Victor models
- The arms are the same length as the original arms from the Thunder, which allows for a direct fit without any modifications
- Each arm features a brake caliper mounting bracket on both sides.
This last point is important: the dual-sided mounting allows you to position the caliper where it best suits the machine, or to adapt the braking configuration. On our custom builds, these arms are often paired with Hope Tech 4 V4 calipers, as explained in our guide on braking systems for powerful electric scooters.
Mounting larger brakes on different fork designs
Not all machines have readily available CNC-machined arms. When you want to mount a four-piston caliper or a larger disc on arms that aren't designed for it, there are two options:
- Our remote brake mounts utilize the original arm mounting points and position the caliper at the correct location for the chosen disc;
- Our brake plate creates or moves mounting points when the arm or motor does not provide them.
In both cases, you need to specify the scooter model, motor, caliper, and disc diameter in the order.
What a rigid arm cannot fix
The arm is just one component of the system. Inaccurate suspension often stems from other sources:
- Joints: Worn pivot axles and bushings create play, regardless of which arm is affected
- Shocks/Dampers: Poorly adjusted or worn shocks can make the vehicle feel unstable
- Tightening:** A wheel axle or pivot that is not properly tightened will negate the benefits of a rigid arm.
Our guide on suspension adjustment covers these points. On other machines, reinforced suspension parts are also available, such as our suspension bars for Miniwalker, which retain the original dimensions but with a more robust construction.
Assembly
Replacing the swingarm requires removing the wheel, the motor, and the brake caliper, followed by the pivot shafts and the shock absorber. Key points to watch out for:
- Reinstall the axles using the provided hardware and thread locker, tightening them to the specified torque
- Ensure that the motor cables are not pinched or stretched throughout the entire range of suspension travel
- Center the caliper over the disc and ensure that it is not rubbing
- Retighten all fasteners after the first few kilometers.
If you prefer to have it done by a workshop, our guide on preparing a Dualtron Thunder shows where the arms are installed and the order of operations.
Workshop tip
Take advantage of the fork replacement to replace worn bushings and pivot axles, and to neatly route the phase cables. The fork is already removed: this is the time when these parts require the least amount of labor.
Frequently Asked Questions
Do the CNC arms change the geometry of the Thunder?
No, they are the same length as the original arms. They provide increased rigidity and caliper mounts, and they are installed in place of the original arms without any modifications to the vehicle.
Should the shock absorbers be replaced at the same time?
It's not mandatory. However, if the shock absorbers are worn out or leaking, this is a good opportunity to replace them, since everything is already disassembled.
Do the arms accommodate wider motors?
A larger motor often requires appropriate axles and spacers to ensure proper centering. This needs to be verified on a case-by-case basis, considering the specific motor and wheel models.
Does anodizing offer resistance to scratches?
It provides excellent protection against corrosion and normal wear. A deep scratch may penetrate the anodized layer; however, the aluminum underneath will then oxidize on the surface, which does not affect its structural integrity.